Your Speakers Are Fine.
Your Room Is The Problem.
Most stereo systems lose 30–60% of their potential to the room they're in. AudioBro shows you what's wrong and what to fix first — no REW file required.
Does This Sound Like Your Room?
Imaging Problems
Vocals are smeared, the center image drifts, or instruments lack a clear sense of space.
Bass Issues
Bass is overpowering in some seats and completely missing in others.
Conflicting Advice
Forums give you a dozen different recommendations, and you are not sure where to start.
From Problem to Progress in Three Steps
Enter room dimensions or upload a photo
AudioBro identifies your room's acoustic problems
Follow the first recommended physical change and re-test
See How It Works
Photo Acoustics Reads the Room
AudioBro identifies acoustic issues from a single room photo — reflections, surfaces, and treatment opportunities.
RoomMatch Refines Placement
Your room dimensions and speaker layout are analysed for optimal geometry. Each step builds on what AudioBro already knows.
Bass Step Appears If Relevant
If your room and system suggest bass integration issues, BassMap activates automatically to diagnose placement and response.
Your First Move
AudioBro identifies the single highest-impact change for your room. Unlock to see what to fix first.
Your First Move
Want to see how AudioBro chooses the first move?
Unlock preview with StarterFull first-move guidance is included with Starter.
What You'll Know After
Turn assumptions into an actionable acoustic roadmap.
Start Optimizing Today
Available on Starter and Pro plans.
- Photo Acoustics visual analysis
- RoomMatch dimensional modeling
- Step-by-step improvement roadmap
Why AudioBro
Identifies the single most impactful problem first
Assesses room geometry without requiring measurement gear
Builds a step-by-step roadmap instead of an overwhelming data dump
Frequently Asked Questions
Do I need REW or a measurement microphone?
No. Fix My Stereo relies on room dimensions and photo analysis to identify major acoustic issues without requiring a measurement file.
What kind of stereo issues does AudioBro catch?
It catches common problems like severe early reflections, boundary interference (SBIR), and dominant room modes that smear imaging and ruin bass.
How does this differ from forum advice?
AudioBro uses your actual room dimensions and photos to provide targeted, prioritized actions rather than generic best practices.
Do I need to buy expensive treatments?
Not necessarily. Often, the highest-impact first move is a change in speaker placement or listening position, which costs nothing.
What does it cost?
Fix My Stereo is included with AudioBro Starter and Pro subscriptions.
Better Stereo Starts With Your Room.
No REW file needed. Start with dimensions or a photo.